gamme_184_b_pro_jpg

DELPHYS GP - Green Power 2.0 range

High-efficiency protection without compromise
Three/three phase UPS from 160 to 1000 kVA/kW

The solution for

• Data centres
• Telecommunications
• Healthcare sector
• Service sector
• Infrastructure
• Industrial applications

Advantages

Energy Saving: high efficiency without compromise

• Offers the highest efficiency in the market using VFI – Double Conversion Mode, the only UPS working-mode that assures total load protection against all mains quality problems.
• Ultra high efficiency output independently tested and verified by an international certification organization in a wide range of load and voltage operating condition.
• Ultra high efficiency in VFI mode is provided by an innovative topology (3-Level technology) that has been developed for all the Green Power UPS ranges.

Full-rated power: kW=kVA

• No power downgrading when supplying the latest generation of servers (leading or unity power factor).
• Real full power, according to IEC 62040: kW=kVA (unity power factor design) means 25% more active power available compared to legacy UPS.
• Suitable also for leading power factor loads down to 0.9 without apparent derating.

Significant cost savings (TCO)

• Maximum energy saving thanks to 96% efficiency in true double conversion mode: 50% saving on energy losses compared to legacy UPS gives significant savings in energy bill.
• Up to 99% efficiency with FAST ECOMODE
• UPS “self-paying” with energy saving.
• Energy Saver mode for global efficiency improvement on parallel systems.
• kW=kVA means maximum power available with the same UPS rating: no overdesign cost and therefore less €/kW.
• Upstream infrastructure cost optimization (sources and distribution), thanks to high performance IGBT rectifier.
• Extended battery life and performance:
- long life battery,
- very wide input voltage and frequency acceptance, without battery use.
• EBS (Expert Battery System) charging management improves battery service life.
• BCR (Battery Capacity Re-injection) removes the constraints of using an additional load bank for the battery discharge test: it consists in re-injecting the energy stored in the batteries to other applications

  • Standard and option features

  • Technical Data

     

    Sn (kVA) 160 200 250 320 400 500 600 800 1000
    Pn [kW] 160 200 250 320 400 500 600 800 1000
    Input / output 3/3
    Parallel configuration up to 4 MW
    Input
    Rated voltage 400 V 3ph
    Voltage tolerance 200 V to 480 V(1)
    Rated frequency 50 / 60 Hz
    Frequency tolerance ± 10 Hz
    Power factor/THDI > 0.99 / < 2.5%(3)
    Output
    Power factor 1 (according to IEC/EN 62040-3)
    Rated voltage 3ph + N 400 V
    Voltage tolerance static load ±1% dynamic load in accordance with VFI-SS-111
    Rated frequency 50 / 60 Hz
    Frequency tolerance ± 2% (configurable for GenSet compatibility)
    Total output voltage distortion - linear load ThdU < 1.5%
    Total output voltage distortion - non-linear load (lEC 62043-3) ThdU < 3%
    Short-circuit current(2) up to 3.4 x In
    Bypass
    Rated voltage rated output voltage
    Voltage tolerance ± 15% (configurable with from 10% to 20%)
    Rated frequency 50/60 Hz
    Frequency tolerance ± 2% (configurable for GenSet compatibility)
    Efficiency
    Online mode @ 40 % of load up to 96%
    Online mode @ 75 % of load up to 96%
    Online mode @ 100 % of load up to 96%
    Fast EcoMode up to 99%
    Environment
    Operating ambient temperature from 0 °C up to +40 °C(1) (from 15 °C to 25 °C for maximum battery life)
    Relative humidity 0% - 95% without condensation
    Maximum altitude 1000 m without derating (max. 3000 m)
    Acoustic level at 1m (ISO 3746) <65 dBA <67 dBA <70 dBA <68 dBA <70 dBA <72 dBA <74 dBA
    UPS Cabinet
    Dimensions W x D x H 700 x 800 x 1930 mm 1000 x 950 x 1930 mm 1400 x 800 x 1930 mm 1600 x 950 x 1930 mm 2800 x 950 x 2060 mm 3510 x 950 x 2060 mm 3910 x 950 x 2060 mm
    Weight 470 kg 490 kg 850 kg 980 kg 1000 kg 1500 kg 2300 kg 2800 kg 3850 kg
    Degree of protection IP 20 (other IP as option)
    Colours cabinet: RAL 7012, door: silver grey
    Standards
    Safety IEC/EN 62040-1, AS 62040.1.1, AS 62040.1.2
    EMC IEC/EN 62040-2, AS 62040.2
    Performance IEC/EN 62040-3, AS 62040.3
    Product declaration CE, RCM (E2376)
    (1) Conditions apply.
    (2) Worst condition (Auxiliary Mains not available).
    (3) With input THDV < 1%.